117
• Domain Name:
Enter the domain name created in step 8.
• User:
Enter your username (email address) created in step 3.
• Password:
Enter the password created in step 3.
The figure Configuration file of No-IP is shown as in
352H
Figure 13-11.
Figure 13-11
12.
Now you have completed device setup. Open Internet Explorer ® in another foreign network with Internet
access, unlike the network where the device is connected to, you need to follow the steps listed below:
1. Enter the address into your browser: http://nome the field created in step 8. For example:
115H
http://vd16s480st.no-ip.biz
2. If the device HTTP port is 80, just type the domain name. Otherwise, enter in the browser address as:
http://nome the field created in Step 8: port number of HTTP. For example:
116H
http://vd16s480st.no-ip.biz:9090
3. Press Enter. The system will ask install application webrec.cab control or not. Please click Yes to perform
a successful connection.
4. If the page does not appear on the computer screen, you need to lower your system safety setup. From
Tools> Internet Options> Security, select Internet and then click Custom Level, you can enable ActiveX
controls. See
353H
Figure 13-12 . Then open your browser and re-enter the domain name of the device.
