I C R E A L T I M E S E C U R I T Y S O L U T I O N S
Chapter
3
Web GUI Operation
This section outlines how to assign an IP address to the camera, and how to
access and control the IPC via it’s built in Web Interface.
3.a Network Connection
Step 1: Ensure the Camera is physically connected to your Network, and Powered ON.
Patch the IP Camera into your network with a standard Ethernet cable. Provide the camera with power
via 12VDC power input jack.
Step 2: Assign an IP address to the IP Camera.
The IHC-6260 Series camera (and all ICRealtime Intercom based IP Cameras) have a factory default
static IP address of
10.22.5.189
. If this matches the same subnet as your LAN, you will be able to login to
the camera by typing this address into your browser (assuming that the IP address does not conflict with
another device on your network).
Alternatively, you can use our IP Auto Search utility to rapidly find and change IP addresses for IC
Realtime series IP Cameras. The utility is available on our support page at :
http://www.icrealtime.com/docs/IPAutoSearch.zip
3.b Logging In, and Main Interface
Step 1: Open up your Web Browser (Safari, Chrome, Firefox, or IE) and input the IP
address of your IP camera.
In Example, open Safari and browse to
http://10.22.5.189
8
