6
•
Please line up the installation holes of the bottom of the pendant mount bracket to the
installation holes in the surface. Then insert the three bolts to the holes of the bottom of
the bracket. Finally fasten the device on the installation surface.
Bracket Adjustment
You can use the M4 inner hex screw to control the bracket. Please use the allen hex
wrench from the installation accessories bag to unfasten the screw. See Figure bellow.
The horizontal angle of the rear cover can rotate 360°, the tilt angle can rotate 90° and
the chassis can rotate 360°.
Please use the allen hex wrench to secure the screw firmly after you complete the
setup.
