IC Realtime Forensic, Руководство пользователя

Страница: 89 / 136

89
z Mark: it is a index in the recorded file. You can use this function to search file and
locate to the corresponding time. When playback, please right click menu to view
mark information. Double click mouse you can go to the corresponding time to play.
z Customized overlay: during the burning, you can overlay customized information.
When you playback, you can see customized information is on the top left corner.
Each time, the overlay information lasts for five seconds. Usually you can use mark
and overlay function together.
Before you enable burning, system still check current CD status.
There are following situations for you selected CD:
If there is backup CD, system prompts there is backup in process, system can not
perform the burning at the same time.
If there is a burning in progress, you need to stop current burning first.
If there are all idle CD. The types include: erasable (new/old) and non-erasable (new).
System can begin burning.
During the burning process, you can view corresponding burning information such as
begin time, end time, total capacity, free capacity.
During the burning process, you can use mark and overlay function to symbolize the
important position in the video. After completed the burning, you can use mark function
to search desired position and view overlay to understand the video more clearly.
If you want to stop burning during the process, you can click stop burning button.
Figure 7-11
7.2.3 PTZ
Before PTZ operation, please make sure you have properly set PTZ protocol. (Please
refer to chapter 7.3.2 Setting-> Pan/Tilt/Zoom).
Click PTZ button, the interface is shown as in Figure 7-12 .