39
User name: It is the user name for you to login the 3G network.
Password: It is the password for you to login the 3G network.
3G wireless network: Here is to display wireless network status, SIM card status, dial status.
If the 3G connection is OK, then you can see the device IP address the wireless network
automatically allocates.
Figure 4-23
3G flow control: It is to show the 3G flow you used. See Figure 4-24.
Figure 4-24
4.8.2
WIFI
The WIFI interface is shown as below. See Figure 4-25.
Please follow the steps listed below to set.
a) Boot up a WIFI module and then check the Auto Connect WIFI box to enable WIFI function.
b) In Figure 4-25, click Refresh button to view the entire WIFI signals available.
c) Double click a WIFI signal on the list, you can see the WIFI connection dialogue box.
d) Select the corresponding verification type. Please contact your network administrator if you
do not know how to select the type here. The WIFI connection shall set proper password.
1
2
3
