IC-CONSOLE-5X – User Manual
PLEASE MAKE SURE THE COM TYPE AND THE PARAMETERS YOU SET HERE ARE THE SAME
AS THE ACTUAL SITUATIONS. OTHERWISE, THE KEYBOARD CAN NOT CONTROL THE
DEVICE!
Zones (Menu Settings > Zone)
With this interface, you can quickly search a device via device ID, device name, COM
address, IP and etc. The Keyboard can automatically connect to the device and you can use
the keyboard to control it.
Operation
Cable Connection
Please connect the keyboards A/B line to the speed dome A/B line connection so that the
connection is correct.
Keyboard Setup
a)
Ensure that the keyboard A/B line and speed dome A/B line connection is set up
correctly.
b)
Set the speed dome address so that the speed dome address and the keyboard RS485
address are the same.
c)
Go to the zones interface on the keyboard.
Note:
Please select protocol according to the speed dome type. The default setup is DH-
SD.
d)
After the setup, click
ESC
to exit control point control interface. System pops up a
dialogue box you can click
ENTER
to save data or click
ESC
to cancel setup.
Operation
On the keyboard, click
ID
to go to the control point interface to set speed dome ID to connect to
the speed dome.
After successful connection, the interface is shown as below. See the image below.
