IC Realtime AVS-B2100, Руководство пользователя

Страница: 17 / 18

12
The 1
st
Menu The 2
nd
Menu The 3
rd
Menu
EDGE AUTO/MANUAL
VALUE
0-15
（
For
manual mode
only
）
RETURN
CONTRA
ST 0-255
SATURA
TION 0-15
BRIGHT
NESS
70-250
，
+10
RETURN
EXIT SAVE
CANCEL
RESET
4.2 Note
Parameter Function
3D NR It is to reduce video noise. The larger the number is, the lower
the noise is. The details of the video may disappear if the value
here is too large.
Contrast It is to adjust video contrast.
The larger the number is, the higher the contrast is. You can
use this function when the whole video bright is OK but the
contrast is not proper. Please note the video may become hazy
if the value is too low. If this value is too high, the dark section
may lack brightness while the bright section may over exposure.
Saturation It is to adjust video saturation.
The larger the number, the strong the color is. This value has
no effect on the general brightness of the whole video. The
video color may become too strong if the value is too high. For
the grey part of the video, the distortion may occur if the white
balance is not accurate. Please note the video may not be
attractive if the value is too low.
Sharpness The value here is to adjust the edge of the video. The larger the
value is, the clear the edge is and vice versa. Please note there
is noise if the value here is too high.
Exposure

Front light: It is to automatically enhance video brightness
by specified value when the whole video is too dark. It is to
get clear and bright video.

Distinguish: It is the customized exposure mode. There are
total nine exposure zones and each zone has its own
specified value.