
The LINK™ Family Manual
Version 1.6 ©iButtonLink, LLC 2016
Page 70
i.
In the “COM Port Number” field at te top, use the drop-down menu to select a new
COM port number equal or less than 15 that is
not
marked as used.
j.
Click “OK” and also click “OK” on the “Properties” window.
k.
Unplug and reinsert the LinkUSB.
l.
Enter the new COM number in the 1-Wire® Viewer setup screen.
Using 1-Wire® Viewer with Other Link Devices
It should be noted that 1-Wire® Viewer does not readily work with all Link devices. It does not,
for example, recognize the LinkHub-S. There is a trick to get around this, but it requires also
having a Link45.
Set up a Link45 and plug it into a properly configured serial port. Start 1-Wire® Viewer. 1-
Wire® Viewer will recognize the Link45 and initialize. While 1-Wire® Viewer is still running,
unplug the Link45 and plug a LinkHub-S into the same serial port. 1-Wire® Viewer will
continue to run and detect all the sensors connected to the LinkHub-S.
Содержание LINK 12
Страница 1: ......
Страница 2: ...The LINK Family Manual Version 1 6 iButtonLink LLC 2016 Page 2 ...