IBS US160, Руководство пользователя

Страница: 21 / 24

21
Instructions for the electrical supply
When connecting
a)
Before connecting the caravan system to the electrical power supply, check that:
1) the power supply, which is available at the power supply at the caravan site, for the
electrical installation and the equipment of the caravan, is suitable for voltage, frequency
and current rating;
2) the cables / lines and the connections are suitable, and
3) the main switch of the caravan is in the off position.
b) Check the cables / wires, plugs and connections for damage.
c) Plug the plug of the flexible cable into the electrical socket provided on the power supply at the
caravan site.
d) Turn on the main switch on the caravan.
e) Check the function of the residual current device (RCDs [FI]) installed in the caravan by
pressing the test buttons and switch it on again.
Remark 1:
The flexible supply line of the caravan should be completely unwound to avoid damage caused by
overheating.
Remark 2:
In case of doubt, or if the supply is not available or is faulty after the above-mentioned procedure has
been carried out, contact the caravan site operator.
When terminating the connection
Turn off the car's main switch and remove the cable. First at the power supply at the caravan site and
then, if available, at the caravan port.
Recurring test
The electrical system of the caravan should preferably be inspected no less than every three years,
and if the caravan is frequently used, annually by a competent electrician who should write a report on
the condition.