IBS DBS, Руководство пользователя

Страница: 10 / 24

10
Installation / Wiring
Classic 12V Installation
Please read the installation steps before performing for a better understanding.
If possible, install the wire in a protective tube and fasten with wire ties.
Do not attach to hot engine parts:
Risk of fire!
1. Route the wires from the wire set from the driver's cab into the engine compartment.
2. Crimp the wire lugs.
3. Install the monitor wire as shown:

Screw the black lead to the minus starter battery.

Screw the red lead on the positive starter battery.

Screw the blue lead to a plus board (Aux) battery.
4. Connect green wire to terminal 86 of the relay.
5. Install the relay (see the mounting instructions under
mounting page 7).
6. Install the Relay power wire (not supplied, see Relay power wire page 7) as shown:

Install a short red wire from the wire kit as a connection wire between terminals 85 and
87.

Install the power wire from the Plus starter battery (Main) on terminal 87 of the relay.

Install the power wire from the Plus of the board battery (Aux) to Terminal 30 of the
Relay.
7. Insert the monitor (see Starting the Monitor on page 8).