23
Instruction Manual IMBus
-
Measuring direction :
Standard
: On pressing in the probe the measuring value becomes bigger.
Inverse
: On pressing in the probe the measuring value becomes smaller. ( Setting is used on probes used in
Bore gauges
)
-
Measuring step :
0.0001
: Setting for measuring systems with 20µm period. ( see datasheet of measuring system )
0.0002
: Setting for measuring systems with 40µm period.
0.00005
: Setting for measuring systems with 10µm period.
....
-
Reference impulse :
Activation / Deactivation of the automatic measuring value reset ( = zero adjustment ) on passing a reference mark.
5.3 IMB-tc1/2/4
1. Short description :
-
The IMB-tc1/2/4 modules allow the connection of incremental measuring systems with TTL output.
-
The pining fulfils the Heidenhain Standard.
2. Configuration :
-
see 5.2.2.
5.4 IMB-ae1
1. Short description :
-
The IMB-ae1 modules allow the connection of pneumatic measuring systems.
2. Configuration :
-
see separate „IMB-ae1“ manual
5.5 IMB-ai1/2/4/8
1. Short description :
-
The IMB-ai1/2/4/8 modules allow the connection of sensors and gauges with analogue output.
-
In addition to the IMB-ai1/2/4/8 modules wiring adapters for the connection of measuring bridges,
temperature sensors, … are offered.
2. Configuration :
-
see 5.1.2.
5.6 IMB-mi2/4/8
1. Short description :
-
The IMB-mi2/4/8 modules allow the connection of gauges with Mitutoyo Digimatic output.
2. Configuration :
-
There is no additional configuration necessary.
5.7 IMB-sm1/2/4
1. Short description :
-
The IMB-sm1/2/4 modules allow the connection of gauges with RS232 output. ( = serial interface )
