11
Plug in the cuff connecting tube into the left
side of the unit. The monitor is used as a
desktop unit.
Unwrap the arm cuff, leaving the “Index“ end
of the cuff through the D-ring of the cuff, so
that the cuff forms a tunnel shape (
a
).
Put your left arm through the cuff loop.
Position the red marked artery range at the
middle of the arm (
b
), in line with your middle
finger. Tighten the cuff by pulling the end of
the cuff (
c
).
Turn your left palm upward and place the
edge of the arm cuff at approximately 2 to 3
cm above the inner side of the elbow joint (
d
).
If the “Index“ arrow falls within the “OK“
range, indicated at the edge of the cuff, this
cuff is suitable for your use. If the “Index“
arrow falls out of the “OK“ range, you may
need a special cuff for measurement.
making a blood pressure measurement 7
a)
b)
c)
d)
e)
7.1 attaching the wrist cuff
2-3 cm
red marked
artery range
a
b
c
d
MediPro 100f Englisch 05.08.2003 9:11 Uhr Seite 11
