IBM xSeries 235, Руководство пользователя

Страница: 29 / 66

v
System Information
Select this choice to display information about your server. Changes that you
make on other menus might appear on this summary screen. You cannot edit
any fields. The System Information choice appears only on the full
Configuration/Setup Utility main menu.
– Product Data
Select this choice to view system information, such as the machine type and
model, the server serial number, and the revision level or issue date of the
BIOS and diagnostics code stored in the electrically erasable programmable
ROM (EEPROM).
v Devices and I/O Ports
Select this choice to view or change the assignments for devices and
input/output (I/O) ports. This choice appears only on the full Configuration/Setup
Utility main menu.
You can use this choice also to enable or disable the integrated SCSI controller
with RAID capabilities and Ethernet controllers, and standard ports (serial,
parallel, and so on).
– The default setting is Enabled for all the controllers you can control from this
menu. If you select Disabled , the system will not configure the disabled
device and the operating system will not detect the device. (This is equivalent
to unplugging the device.)
– If the integrated SCSI controller with RAID capabilities is disabled and no
SCSI adapter is installed, the server will have no SCSI capability.
– If the on-board Ethernet controller is disabled and no Ethernet adapter is
installed, the server will have no Ethernet capability.
v
Date and Time
Select this choice to set the system date and time. This choice appears only on
the full Configuration/Setup Utility main menu.
The system time is in a 24-hour format (hour:minute:second).
v
System Security
Select this choice to set passwords or the Remote Control Security settings. This
choice appears only on the full Configuration/Setup Utility main menu.
You can implement two levels of password protection:
– Power-on Password
Select this choice to set or change a power-on password. See “Using
passwords” on page 20 for more information.
– Administrator Password
Attention: If an administrator password is set and then forgotten, it cannot be
overridden or removed. You must replace the system board.
Note: This choice is available on the Configuration/Setup Utility menu only if
the optional IBM Remote Supervisor Adapter is installed in your server.
Select this choice to set or change an administrator password.
The administrator password provides access to all choices on the
Configuration/Setup Utility main menu. You can set, change, or delete both
the administrator and power-on passwords and allow a power-on password to
be changed by the user.
See “Using passwords” on page 20 for more information.
Chapter 2. Configuring your server
17