IBM xSeries 200, Руководство по техническому обслуживанию аппаратной части

Страница: 98 / 148

No beep symptoms
No Beep Symptom FRU/Action
No beep and the system
operates correctly.
1. Check speaker cables
2.
Speaker
3.
System board
No Beeps occur after
successfully completing
POST
1. Check speaker connections
2. Speaker
3. System board
No ac power
1. Check the power cord.
2. Power supply.
No beep and no video
1. See “Undetermined problems” on page 97
Diagnostic error codes
Note: In the following error codes, if XXX is 000 , 195 , or 197 , do not replace a FRU.
The description for these error codes are:
000 The test passed.
195 The Esc key was pressed to abort the test.
197 This is a warning error and may not indicate a hardware failure.
For all error codes, replace/follow the FRU/Action indicated.
Error Code/Symptom FRU/Action
001-XXX-000
(Failed core tests)
1. System Board
001-XXX-001
(Failed core tests)
1. System Board
001-250-000
(Failed System Board ECC)
1. System Board
001-250-001
(Failed System Board ECC)
1. System Board
005-XXX-000
(Failed Video test)
1. Video Adapter (if installed)
2. System Board
011-XXX-000
(Failed COM1 Serial Port
test)
1. System Board
011-XXX-001 (Failed COM2
Serial Port test)
1. System Board
014-XXX-000
(Failed Parallel Port test)
1. System Board
015-XXX-001
(USB interface not found,
board damaged)
1. System Board
90
xSeries 200 Type 8479 and xSeries 200VL Type 8481: Hardware Maintenance Manual