IBM x3750 M4 Скачать руководство пользователя страница 208

Страница: 208 / 694

Move the jumper from pins 1 and 2 to pins 2 and 3 to enable the UEFI
recovery mode.

Reinstall the server cover; then, reconnect all power cords.

Restart the server. The power-on self-test (POST) starts.

Boot the server to an operating system that is supported by the IBM Flash
UEFI Update package that you downloaded.

Perform the firmware update by following the instructions that are in the
firmware update package readme file.

Copy the downloaded firmware update package into a directory.

10.

From a command line, type

filename

-s

, where

filename

is the name of the

executable file that you downloaded with the firmware update package.

11.

Turn off the server and disconnect all power cords and external cables, and
then remove the server cover.

12.

Move the UEFI boot recovery jumper (J71) back to the primary position (pins
1 and 2).

13.

Reinstall the server cover, and then reconnect all the power cables.

14.

Restart the server.

In-band automated boot recovery method

Note:

Use this method if the BOARD LED on the light path diagnostics panel is lit

and there is a log entry or

Booting Backup Image

is displayed on the firmware

splash screen; otherwise, use the in-band manual recovery method.

192

System x3750 M4 Types 8722 and 8733: Installation and Service Guide

Содержание x3750 M4























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание x3750 M4

Отзывы:

IBM x3750 M4, Инструкция по установке и обслуживанию, Страница: 208 / 694

Результаты поиска

Содержание x3750 M4

Отзывы: