IBM x Series 200 Скачать руководство пользователя страница 35

Страница: 35 / 152

Diagnostics

Event ID

Type

Description

Error

Explanation:

Team name and physical adapter name are

the same. This is an invalid configuration.
Action:

Reconfigure the adapter team by double-clicking

the PROSet icon in the control panel.

Error

Explanation:

Unable to allocate required resources.

Action:

Free some memory resources and restart.

Error

Explanation:

Unable to read required registry parameters.

Action:

Reconfigure the adapter team by double-clicking

the PROSet icon in the control panel.

Error

Explanation:

Unable to bind to physical adapter.

Action:

Reconfigure the adapter team by double-clicking

the PROSet icon in the control panel.

Error

Explanation:

Unable to initialize an adapter team.

Action:

Reconfigure the adapter team by double-clicking

the PROSet icon in the control panel.

Informational

Explanation:

Team nn. Primary adapter is initialized.

Action:

None.

Informational

Explanation:

Team nn. Secondary adapter is initialized.

Action:

None.

Informational

Explanation:

Team nn. Virtual adapter or Team is

initialized.
Action:

None.

Informational

Explanation:

Team nn. Primary adapter is switching over.

Action:

None.

Warning

Explanation:

Team nn. Adapter link down.

Action:

Make sure the adapter is functioning properly.

Informational

Explanation:

Team nn. Secondary adapter took over.

Action:

None.

Warning

Explanation:

Team nn. Secondary adapter is deactivated

from the Team.
Action:

Make sure the secondary adapter is functioning

properly and that the adapter cable is securely connected to
the LAN.

Informational

Explanation:

Team nn. Secondary adapter has rejoined the

Team.
Action:

None.

Informational

Explanation:

Team nn. Secondary adapter link is up.

Action:

None.

Error

Explanation:

Team nn. The last adapter has lost its link.

Network connection has been lost.
Action:

Shut down the server and replace the adapters;

then, restart the server to reestablish the connection.

Informational

Explanation:

Team nn. An adapter has reestablished the

link. Network connection has been restored.
Action:

None.

Table 6. NDIS (Windows NT or Windows 2000) driver teaming messages for the
Ethernet controller.

Содержание x Series 200

























































































































































Результаты поиска

Содержание x Series 200

Отзывы:

IBM x Series 200, Руководство по техническому обслуживанию аппаратной части, Страница: 35 / 152

Результаты поиска

Содержание x Series 200

Отзывы: