IBM WebSphere DataPower XC10, Руководство по установке

Страница: 21 / 52

Chapter 1. Introduction
IBM WebSphere DataPower XC10 is a 1U rack-mountable appliance.
Specifications and features
This section contains information about the specifications and features of the
DataPower XC10 appliance.
Specifications
Table 1 summarizes the specifications of the WebSphere DataPower XC10 chassis.
Table 1. Appliance specifications
Dimensions:
Height 1.7 in. (4.32 cm)
Width 19 in. (48.25 cm)19.13 in. (48.59 cm) with rails
Depth 28.12 in. (71.42 cm)33.05 in. (83.94 cm) with rails
Weight Maximum: 37.48 lb. (17 kg)
Electrical input:
Sine-wave 50 - 60 Hz (single-phase) required
110 Voltage AC Minimum: 100 V
RMS
Maximum: 127 V
RMS
220 Voltage AC Minimum: 200 V
RMS
Maximum: 240 V
RMS
Heat output Maximum: 590 watts (2014 Btu) per hour
Environment:
Air temperature Turned on:
v
Altitude 0 to 914.4 m (3000 ft.)50° to 95° F (10° to 35° C)
v Altitude: 914.4 m (3000 ft.) to 2133.6 m (7000 ft.)50° to 89.6° F
(10° to 32° C)Maximum altitude: 2133.6 m (7000 ft.)
Turned off: 50° to 109.4° F (10° to 43° C)
Shipping: -40° to 140° F (-40° to 60° C)
Humidity 8% to 80%
Fan acoustics Front: L
A
=51 dB to L
A
=64 dB
Rear: L
A
=55 dB to L
A
=66 dB
The lower limits indicate the fans during normal operating
conditions. The upper limits indicate the fans during startup or
high temperature situations.
Power level acoustics 65 to 79 dB (Declared)
Features
The WebSphere DataPower XC10 appliance provides the hard disk array for data
storage for logging. This hard disk array is a simple swap Serial Attached SCSI
(SAS) hard disk drive with the specifications shown in Table 2 on page 2.
© Copyright IBM Corp. 2010
1