IBM WebSphere Business Integration Adapter, Руководство пользователя

Страница: 54 / 92

The default value is false .
OADMaxNumRetry
Specifies the maximum number of times that the OAD automatically attempts to
restart the application-specific component after an abnormal shutdown.
The default value is 1000 .
OADRetryTimeInterval
Specifies the number of minutes of the retry time interval that the OAD
automatically attempts to restart the application-specific component after an
abnormal shutdown. If the application-specific component does not start within the
specified interval, the OAD repeats the attempt as many times as specified in
“OADMaxNumRetry”.
The default is
10
.
PollEndTime
Time to stop polling the event queue. The format is
HH:MM
, where
HH
represents
0-23 hours, and
MM
represents 0-59 seconds.
You must provide a valid value for this property. The default value is
HH:MM
, but
must be changed.
PollFrequency
The amount of time between polling actions. Set PollFrequency to one of the
following values:
v
The number of milliseconds between polling actions.
v The word key , which causes the connector to poll only when you type the letter
p in the connector’s Command Prompt window. Enter the word in lowercase.
v
The word
no
, which causes the connector not to poll. Enter the word in
lowercase.
The default is
10000
.
Important: Some connectors have restrictions on the use of this property. To
determine whether a specific connector does, see the installing and
configuring chapter of its adapter guide.
PollStartTime
The time to start polling the event queue. The format is HH:MM , where HH represents
0-23 hours, and MM represents 0-59 seconds.
You must provide a valid value for this property. The default value is HH:MM , but
must be changed.
RequestQueue
The queue that is used by the integration broker to send business objects to the
connector.
The default value is
REQUESTQUEUE
.
44
Adapter for i2 User Guide