IBM WDA L80 Скачать руководство пользователя страница 9

WARNING:

This disk drive can be damaged by Electrostatic Discharge; please follow recommended ESD
procedures before unpacking or handling the drive.  Ask your Dealer for details if you need
assistance.
 

PACKAGING: 

The drive must be protected against Electrostatic Discharge especially when being handled.  The
safest way to avoid damage is to put the drive in an antistatic bag before ESD wrist straps etc, are
removed.
Drives should only be shipped in approved containers; severe damage can be caused to the drive if
the packaging does not adequately protect against the shock levels induced when a box is
dropped.  Consult the dealer if you do not have an approved shipping container.
 
This data sheet is not a substitute for the full product specification which should be used when
detailed information is required.
Product Description data represents IBM's design objectives and is provided for comparative
purposes; actual results may vary based on a variety of factors.  This product data does not
constitute a warrant.  Questions regarding IBM's warrant terms or methodology used to derive
this data should be referred to your IBM representative.  Data subject to change without notice.
 
AMP is a trademark of AMP Incorporated. 
DATA MATE is a trademark of AMP Incorporated. 
MOLEX is a trademark of Molex Incorporated. 
NEXT is a trademark of NEXT Corporation. 
Western Digital is a trademark of the Western Digital Corporation.

IBM OEM Europe 
PO Box 6 Langstone Road 
Havant 
Hampshire 
P09 ISA 
United Kingdom 
Telephone:  (44) 705 486363 

Содержание WDA L80










Отзывы: