IBM Universal Tape Library, Руководство пользователя, Страница: 13 / 96

Front panel
The front panel contains the magazine access doors and the operator control panel.
The magazine access doors are used to access the magazines, and they protect
the data cartridges.
Note: The illustrations in this document might differ slightly from your hardware.
Table 1 describes the operator control panel components.
Table 1. Operator control panel components
Component Description
Display screen The display screen displays library status
information and is used to access the library
menus. Use the menus to view or change library
configuration information and run diagnostic tests.
Control buttons Use the control buttons to select menu options and
values.
Power button Press the power button to turn the library on and
off.
LED The LED displays the library status:
v
Steady green: Idle
v
Flashing green: Busy
v
Steady amber: Error
v
Flashing amber: Attention
Back panel
Figure 2 on page 4 shows the components on the back panel.
Note: The following illustration shows a SCSI tape drive. Fibre Channel tape drives
are similar.
Cover
Operator control panel
Display screen
Control buttons
Power switch
Magazine
access
door
Magazine access
door
Figure 1. Front panel components
Chapter 1. Introduction
3