IBM Ultrium 3580, Руководство по установке, эксплуатации и обслуживанию, Страница: 15 / 20

Attention Notice
An attention notice indicates the possibility of damage to a program, device, or
system, or to data. An exclamation point symbol may accompany an attention
notice, but is not required. Sample attention notices follow:
Attention: If you use a power screwdriver to perform this
procedure it could destroy the tape.
Attention: Do not operate the 3580 Tape Drive in a poor air-quality environment.
Performing the Safety Inspection Procedure
Before you service the 3580 Tape Drive, perform the following safety inspection
procedure:
1. Stop all activity on the SCSI bus.
2. Turn off the power to the tape drive.
3. Disconnect the SCSI cable and check the SCSI bus terminator for damage.
4. Unplug the tape drive’s power cord from the electrical outlet.
5. Check the tape drive’s power cord for damage, such as a pinched, cut, or
frayed cord.
6. Check the tape drive’s SCSI bus (signal) cable for damage.
7. Check the cover of the tape drive for sharp edges, damage, or alterations that
expose its internal parts.
8. Check the cover of the tape drive for proper fit. It should be in place and
secure.
9. Check the product label on the bottom of the tape drive to make sure that it
matches the voltage at your outlet.
End of Life (EOL) Plan
This box is a purchased unit. Therefore, it is the sole responsibility of the purchaser
to dispose of it in accordance with local laws and regulations at the time of
disposal.
This unit contains recyclable materials. The materials should be recycled where
facilities are available and according to local regulations. In some areas IBM may
provide a product take-back program that ensures proper handling of the product.
For more information, contact your IBM representative.
Safety and Environmental Notices
xiii