IBM Turboways 155, Инструкция по установке и эксплуатации

Страница: 14 / 36

9. Type the following to display the Find window:
/
10. Type the following
devices.pci.141ð7cðð
and press Enter. (The system finds and highlights this device driver.)
11. Press PF7 to select the device driver and press Enter.
12. The Install Additional Device Software screen displays. Entry data fields are
automatically updated. Press Enter to accept the data.
13. The ARE YOU SURE window displays. Press Enter to accept the data.
14. The COMMAND STATUS screen appears.
Ÿ
The term
RUNNING
is highlighted to indicate that the install and configure
command is in progress.
Ÿ
When
RUNNING
changes to
OK
, scroll down to the bottom of the page and
locate the Installation Summary.
Ÿ
After a successful installation,
SUCCESS
appears in the Result column of the
summary at the bottom of the page.
15. Remove the installation media from the drive.
16. Press F10 to exit SMITTY.
17. At the command line, type:
shutdown -F
and press Enter.
Refer to your operating system User's Guide for instructions.
18. Go to “Installing the Adapter.”
Installing the Adapter
Be sure you have installed the ATM155 software as explained in Chapter 2,
“Installing the ATM155 Software and the TURBOWAYS 155 PCI UTP ATM Adapter”
on page 2-1. Refer to your system unit documentation for specific instructions to
install your adapter.
2-2
Installation and User's Guide