IBM Turboways 155, Инструкция по установке и эксплуатации

Страница: 11 / 36

Chapter 1. Overview
This document is written for system administrators and for experienced computer
users who have a general understanding of asynchronous transfer mode (ATM),
networking, and AIX Version 4.2.1.
The document provides instructions to install the TURBOWAYS 155 PCI UTP ATM
Adapter with AIX and with ATM155 software. Instructions include directions to
configure the TURBOWAYS 155 PCI UTP ATM Adapter.
TURBOWAYS 155 PCI MMF ATM Adapter.
Note: Instructions assume you are connecting the TURBOWAYS 155 PCI UTP
ATM Adapter on AIX to an ATM switch or concentrator. Follow the instructions in,
Chapter 2, “Installing the ATM155 Software and the TURBOWAYS 155 PCI UTP
ATM Adapter” on page 2-1, to install the ATM155 software and to install and
connect the TURBOWAYS 155 PCI UTP ATM Adapter.
Go to Chapter 3, “Configuring and Using ATM155 Software” on page 3-1, for
directions to configure the adapter; to set the hostname, nameserver, and gateway;
to configure PVCs, or to remove previously installed ATM155 software.
Chapter 4, “Managing the Network” on page 4-1, assists you in implementing and
maintaining your ATM network.
The appendices provide concise and helpful information. If you have any problems
installing or configuring your adapter, refer to Appendix A, “Troubleshooting” on
page A-1, for problem-solving information. For a discussion of product features and
Chapter 1. Overview
1-1