IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, Руководство пользователя

Страница: 208 / 248

e. Select Display version information. The ProtecTIER version is shown in
the first line of output, in the first three digits after the colon. The version
information looks similar to the following message:
PT version : 3.4.1
If the ProtecTIER version is correct, continue to the next step. If the
ProtecTIER version is incorrect, the installation has failed. Contact IBM
Support for assistance.
Results
The re-installation process for Red Hat Linux version 5.11 and ProtecTIER version
3.4.1 is complete. Proceed to “Recovering the configuration of a replaced server.”
Recovering the configuration of a replaced server
Complete this task to recover the configuration of a replaced server as part of the
recovery process.
Procedure
1. After the system boots up from installing the ProtecTIER package, type
ptconfig
at the
login as:
prompt and
ptconfig
at the
password:
prompt. The
ProtecTIER Service Menu is displayed:
2. From the ProtecTIER Service Menu, select ProtecTIER Configuration (...) .
Type the corresponding number and press <Enter> . The ProtecTIER
Configuration (...) menu is displayed:
----------------------------------------------------------------------
ProtecTIER Service Menu running on rasddx
----------------------------------------------------------------------
1) ProtecTIER Configuration (...)
2) Manage ProtecTIER services (...)
3) Health Monitoring (...)
4) Problem Alerting (...)
5) Version Information (...)
6) Generate a service report
7) Generate a system view
8) Update ProtecTIER code
9) ProtecTIER analysis (...)
E) Exit
----------------------------------------------------------------------
>>> Your choice?
188
IBM TS7650G Deduplication Gateway for ProtecTIER
®
: User's Guide for FSI Systems