IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, Руководство пользователя, Страница: 181 / 248

Creating a performance analysis report
Complete this task to create a performance analysis report on your ProtecTIER
system for use by IBM Service.
About this task
Create a performance analysis report for the nodes in your system when you want
to analyze your system statistics.
Procedure
1. If you are using a single node configuration, connect a USB keyboard and
graphics-capable monitor to the server.
2. If you using in a clustered configuration, verify that both Server A and Server B
are running:
v Yes , continue to step 3
v No , power on any servers that are not running, wait for the boot cycle to
complete, and then continue to step 3
3. At the localhost Login prompt, type:
ptconfig
and press
<enter>
.
4. At the Password prompt, type: ptconfig and press <enter>
The
ProtecTIER System Menu
displays:
------------------------------------------------------------------------------
ProtecTIER Service Menu running on rassmx
------------------------------------------------------------------------------
1) ProtecTIER Configuration (...)
2) Manage ProtecTIER services (...)
3) Health Monitoring (...)
4) Problem Alerting (...)
5) Version Information (...)
6) Generate a service report
7) Generate a system view
8) Update ProtecTIER code
9) ProtecTIER Analysis (...)
E) Exit
------------------------------------------------------------------------------
>>> Your choice?
5. Select ProtecTIER Analysis . Type the corresponding number and press <enter> .
The Performance Analysis (...) menu displays:
------------------------------------------------------------------------------
ProtecTIER Service Menu running on rassmx
Performance Analysis (...)
------------------------------------------------------------------------------
1) Performance Analysis
B) Back
E) Exit
------------------------------------------------------------------------------
>>> Your choice?
6. Select Performance Analysis . Type the corresponding number and press
<enter> . The following output is displayed:
Begin Processing Procedure [Jan 29 06:50:41]
Please provide the following information: (’q’ to quit)
1) Date interval.
2) Specific number of days from current date backwards.
Choose:
7. Enter the date to filter the report data in one of the following ways:
Chapter 16. Reporting
161