United Kingdom Notice
This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to
prevent interference to the reception of radio and television broadcasts.
United States Federal Communications Commission (FCC) Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. IBM® is not responsible for any radio or television interference
caused by using other than recommended cables and connectors, or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device might not cause harmful interference, and (2) this
device must accept any interference received, including interference that might cause undesired operation.
Responsible Party:
International Business Machines Corporation
New Orchard Road
Armonk, NY 10504
Contact for FCC compliance information only: [email protected]
Safety and environmental notices
When this product is used, observe the danger, caution, and attention notices that are contained in this guide. The notices are accompanied by symbols that represent the
severity of the safety condition.
Most danger or caution notices contain a reference number (Dxxxx or Cxxxx). Use the reference number to check the translation in the IBM Systems Safety Information
(G229-9054) publication included in your ship group.
The sections that follow define each type of safety notice and give examples.
Possible safety hazards
Class I laser product
Tape storage equipment must be gradually acclimated to the surrounding environment to prevent condensation.
Performing the safety inspection procedure
For your safety, IBM provides a power cord with a grounded attachment plug to use with this IBM product. To avoid electrical shock, always use the power cord and
plug with a properly grounded outlet.
Attention notices
Danger notices
A danger notice calls attention to a situation that is potentially lethal or extremely hazardous to people. A lightning bolt symbol always accompanies a danger notice to
represent a dangerous electrical condition.
To prevent a possible shock from touching two surfaces with different protective ground(earth), use one hand, when possible, to connect or
disconnect signal cables. (D001)
Overloading a branch circuit is potentially a fire hazard and a shock hazard under certain conditions. To avoid these hazards, ensure that your system
electrical requirements do not exceed branch circuit protection requirements. Refer to the information that is provided with your device or the power
rating label for electrical specifications. (D002)
If the receptacle has a metal shell, do not touch the shell until you have completed the voltage and grounding checks. Improper wiring or grounding
could place dangerous voltage on themetal shell. If any of the conditions are not as described, STOP. Ensure the improper voltage or impedance
conditions are corrected before proceeding.(D003)
An electrical outlet that is not correctly wired could place hazardous voltage on the metal parts of the system or the devices that attach to the system.
It is the responsibility of the customer to ensure that the outlet is correctly wired and grounded to prevent an electrical shock.(D004)
When working on or around the system, observe the following precautions:
IBM TS22xx - TS2290, TS2280, and TS2270
137
Содержание TS2290
Страница 1: ...IBM TS22xx TS2290 TS2280 and TS2270 IBM...