Installation and operation guide
3
Windows 95/98 installation
Note: Power for the IBM Travelstar E is supplied through the PC
Card cable. No other power is required and the green power
switch is non-functional.
1. With the notebook powered on and Windows running, first
connect the PC Card cable to your IBM Travelstar E. Then
connect the other end of the cable to your notebook
PCMCIA connector.
2. Follow the instructions on the screen.
3. At the Welcome Menu, you will have the opportunity to
install a number of different programs. Click on the items
you wish to install and follow the Install Wizard's
instructions.
4. To exit the Menu, click on "Quit and Return to Desktop".
5. To disconnect your IBM Travelstar E, disable the PC Card
prior to removing it from the notebook by doing the
following:
•
From the Windows 95/98 desktop double-click on My
Computer > Control Panel > PC Card.
•
Select the PC Card slot to which the IBM Travelstar E is
connected.
•
Click Stop.
•
Click OK. You can now safely remove the PC Card from
your notebook.
