IBM TotalStorage, Руководство по установке

Страница: 63 / 91

v
Node
v
Ethernet
v
FC port–1 through 4
v
Select language
Related topics:
v “Cluster options”
v
“Node options” on page 42
v “Ethernet option” on page 45
v
“Fibre channel port–1 through 4 option” on page 45
v
“Select language? option” on page 46
Cluster options
The main cluster option displays the cluster name that the user has assigned. If no
name has been assigned, the IP address of the cluster is displayed. If this SAN
Volume Controller is not assigned to a cluster, the field is blank.
Related topics:
v “Status”
v
“IP address”
v
“Subnet mask”
v
“Recover cluster?” on page 42
Status
This field is blank if this SAN Volume Controller is not a member of a cluster. If
this SAN Volume Controller is a member of a cluster, the field indicates the
operational status of the cluster, as follows:
Active Indicates that this SAN Volume Controller is an active member of the
cluster.
Inactive
Indicates that the SAN Volume Controller is a member of a cluster, but is
not now operational. It is not operational either because the other SAN
Volume Controllers that are in the cluster cannot be accessed, or because
this SAN Volume Controller has been excluded from the cluster.
Degraded
Indicates that the cluster is operational, but one or more of the member
SAN Volume Controllers are missing or have failed.
IP address
This field contains the existing Ethernet IP address of the cluster. It is set during
the create-cluster operation. You use this address to access the cluster from the
command line tools or from a web browser. If this SAN Volume Controller is not a
member of a cluster, this field is blank.
Subnet mask
The subnet mask option displays the subnet mask address. It is set during the
create-cluster operation.
Chapter 5. Using the front panel display on the SAN Volume Controller
41
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|