IBM TotalStorage SAN256N Director 2045-N16 Скачать руководство пользователя страница 19

Страница: 19 / 157

xvi

About this document

This guide provides information on hardware installation and maintenance for the IBM
TotalStorage SAN Switch SAN256N Director 2045-N16 as well as hardware
replacement procedures.

The intended audience for this document is anyone who is responsible for installing,
maintaining, or operating the SAN256N director.

The sections that follow provide information about:

• “IBM TotalStorage SAN256N Director 2045-N16”

• “Web sites”

• “Getting software updates”

• “Getting help”

• “How to send your comments”

IBM TotalStorage SAN256N Director 2045-N16

The following documents contain information related to this product:

• IBM TotalStorage SAN256N Director 2045-N16 Installation and Maintenance Guide

(GC26-7714) - this document

• IBM TotalStorage SAN256N Director 2045-N16 Release Notes (GC26-7716)

• IBM TotalStorage SAN Director 2045 Statement of Limited Warranty (GC26-7718)

• IBM TotalStorage SAN n-type Director Family Enterprise Manager Installation and

Operator Guide (GC26-7720)

• IBM TotalStorage SAN n-type Director Series Site Planning Guide (GC26-7715)

• IBM TotalStorage Translated Safety Notices (GC26-7717)

Web sites

You can find additional information related to the software for this and other switches at
the following Web site:

http://www.ibm.com/servers/storage/support/san

To get specific details about models and firmware that the switch supports, see the
following Web site:

http://www.storage.ibm.com/ibmsan/

For detailed information about the Fibre Channel standards, see the Fibre Channel
Industry Association (FCIA) Web site at:

www.fibrechannel.org/

For a directory of worldwide contact information, including technical support, see the
following Web site:

www.ibm.com/contact/

Содержание TotalStorage SAN256N Director 2045-N16






























































































































































Результаты поиска

Содержание TotalStorage SAN256N Director 2045-N16

Отзывы:

IBM TotalStorage SAN256N Director 2045-N16, Руководство по установке и обслуживанию, Страница: 19 / 157

Результаты поиска

Содержание TotalStorage SAN256N Director 2045-N16

Отзывы: