IBM TotalStorage SAN16M-R SAN, Инструкция по установке и обслуживанию

Страница: 49 / 116

25 Chapter 2: Installing and connecting the SAN Router
Connect these ports to:
• Hosts/Initiators
— FC HBA port connections.
— FC Intelligent Array ports functioning in an Initiator role.
• Targets/Storage.
— FC JBOD ports.
— FC storage array ports.
— FC tape drive/ library ports.
• FC switches
— FC Switch E_Ports.
— SCSI to FC Bridge devices.
Figure 6
Fibre channel ports (two of twelve)
Task 10: Configure and enable call home notification
The call home notification feature enables the EFCM application
installed on a server to automatically dial-in to a support center to
report system problems and events from the SAN Router. To
configure the call home notification feature, you must first specify the
support center information using the call home configuration tool
provided with EFCM. After the call home notification feature is
configured, you need to enable call home notification using EFCM.
The steps to configure and enable the call home notification are listed
in the EFC Manager Software User Manual.
1 2 1 2
i2640006