IBM TotalStorage Network Attached Storage 300G, Справочник пользователя

Страница: 54 / 86

Important
After the appliance restarts, a series of configuration and system preparation
programs that finish configuring the system are run automatically. These
programs must finish running before you use any included applications (such
as the IBM Advanced Appliance Configuration Utility or the Terminal Services
Client) to connect to or configure your Model G00. Do not connect to or
configure the appliance for at least 15 minutes after system restart. This notice
applies only to the first time the Model G00 is started after using the Recovery
CD.
Note: Logical Disk 0 will be configured to a 3GB NTFS boot partition. Any other
previously configured logical disk drives will be left unchanged.
Attention: The Model G00 does not have a monitor, keyboard, or mouse attached
to it under normal operating conditions. Because of this, you can not interact with
the preload-image restore process using a monitor. Starting the Recovery CD will,
without visually prompting the user, automatically destroy all data on the system
drive. Use the Recovery Enablement Diskette and Recovery CD only when it is
absolutely necessary to restore the preloaded system image.
Using the Supplementary CD
The Supplementary CD contains documentation and copies of key software
applications that are preinstalled on your Model G00. Table 5 includes the names of
the directories found on the Supplementary CD and a description of the contents of
the directory.
Table 5. Supplementary CD directories
Directory Name Contents
IBM Advanced
Appliance
Configuration IBM Advanced Appliance Configuration console and agent installation files. The IBM Advanced
Appliance Configuration agent is preinstalled as a Windows Powered service on the Model G00.
To install the Advanced Appliance Configuration console, run setup.bat from the x:\IBM
Advanced Appliance Configuration directory, where x is the drive letter assigned to your
CD-ROM drive.
DiskImages Self-extracting diskette images for the Recovery Enablement Diskette (RecovDsk.exe) and the
ServeRAID Configuration Reset diskette. To make a diskette, run the executable file and insert
HD 1.44 floppy diskette into drive A: when prompted. Be sure to read the readme!.txt file
located in this directory for last minute and model specific updates.
Attention: Starting your system with the ServeRAID Configuration Reset diskette will reset
your ServeRAID adapter to factory default settings. All data stored in your ServeRAID array will
be lost. Use this diskette only if you want to reset the Model G00 to factory default settings.
I386 Windows Powered installation files. If you add device drivers, OS features, and so on, you may
be prompted to insert your Windows Powered CD-ROM. If so, insert the Supplementary CD,
and specify path x:\i386 where x is the drive letter assigned to your CD-ROM drive.
Services for UNIX
2.0 SFU 2.0 installation files. If you add features that are not preloaded, you will be prompted for
this CD.
Terminal Services
Client The stand-alone Win32 Terminal Services Client application. The Model G00 appliance supports
Web-based terminal services, so this is an optional installation. To install the Terminal Services
Client, run setup.exe from the Disk1 subdirectory.
readme.txt This is a text file that describes the contents of the Supplementary CD.
42
300G User’s Reference