IBM TotalStorage IP Storage 200i 110, Руководство по установке

Страница: 17 / 94

Chapter 2. Installation procedures
This chapter provides procedures for installing the IP Storage 200i Models 110 and
210.
Preinstallation checklist
Before beginning an installation, record your product information in Table 3. Refer to
this information when service is necessary.
Table 3. Product information
Record your product information in this table.
Product name IBM TotalStorage IP Storage 200i
Machine type 4125
Model number _____________________________________________
Serial number _____________________________________________
The following items are shipped with the IP Storage 200i. Verify that you have all
the items listed.
v
Model 110 or Model 210
v
Power cords (3)
v
Documentation set, including:
– Recovery CD
– Publications and Code CD
–
Safety Information—Read This First
– Quick Start Instructions
– IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide
v
Rack-mounting kit (for Model 210), including:
– Cable-management assembly
– Front and rear rack-mounting templates
– 7 cable straps
– 10 cable ties
– 12 cage nuts
– 12 clip nuts
– 2 screw packages
– 2 slide rails
If you ordered options for the appliance, this package might contain additional
hardware or publications for those options.
Note: Visually inspect the hardware to ensure that it was not damaged during
shipping. If any items are missing or damaged, contact your place of
purchase.
© Copyright IBM Corp. 2001
5