IBM TotalStorage IP Storage 200i 110, Руководство по установке

Страница: 14 / 94

Standard features
Table 1 lists the standard features of the Models 110 and 210.
Table 1. Standard features of Model 110 and Model 210
Hardware Model 110 Model 210
System
v
One 1.133-GHz processor
v
512-KB Level-2 cache
v
Integrated 10/100 Ethernet
(used only for configuration
and servicing)
v
Five PCI expansion slots
v
Dual 1.133-GHz processors
v
512-KB Level-2 cache
v
Integrated 10/100 Ethernet
(used only for configuration and
servicing)
v
Five PCI expansion slots
Memory
v
512 MB
v
Type: 133-MHz, ECC,
SDRAM, registered DIMMs
v
Upgradable to a maximum of
1.5 GB
v
1 GB
v
Type: 133-MHz, ECC, SDRAM,
registered DIMMs
v
Upgradable to a maximum of 2
GB
Internal hard disk
drives (HDDs) 20.4-GB IDE 20.4-GB IDE
Expansion bays
v
Hot-swap: six slim-high
v
Non-hot-swap: three 5.25-in.,
one for CD-ROM drive, one
for IDE drive, and one spare
v
Hot-swap: six slim-high
v
Non-hot-swap: three 5.25-in.,
one for CD-ROM drive, one for
IDE drive, and one spare
Hot-swap hard disk
drives (HDDs) Three Ultra160 10 000 rpm 36.4
GB or 73 GB
Total: 109 GB or 219 GB
Three Ultra160 10 000 rpm 36.4
GB or 73 GB
Total: 109 GB or 219 GB
RAID controller ServeRAID
™
-4Mx
64-MB cache
ServeRAID-4H
128-MB cache
Network Gigabit Ethernet SX Adapter or
Gigabit Ethernet Copper
Adapter
Gigabit Ethernet SX Adapter or
Gigabit Ethernet Copper Adapter
Power supplies Three 250 W (115 - 230 V) Three 250 W (115 - 230 V)
2
IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide