IBM TotalStorage FAStT700, Руководство пользователя

Страница: 50 / 100

2. Check the Battery Support Information label, as shown in Figure 31.
The Battery Support Information label on the front of the battery has three
dates:
v
Date of Manufacture - Date the battery was built at the factory
v
Date of Installation - Date the battery was installed in the FAStT700 Storage
Server
v
Replacement Date - Battery replacement date (see the note at the beginning
of this section)
3. Do one the following:
v
If it is time to replace the battery, install a new battery using the procedure
described in “Replacing a failed battery” on page 39.
v
If it is not time to replace the battery, replace the FAStT700 Storage Server
bezel, as shown in Figure 21 on page 17.
Preparing to move the FAStT700 Storage Server
Remove each component CRU before moving the FAStT700 Storage Server to a
new location or before removing the chassis from its rack cabinet. This helps
safeguard the equipment and ensures a smoother transition to the new
environment.
If you are moving the FAStT700 Storage Server a short distance, and you have
sufficient assistance or equipment, you might be able to move the FAStT700
Storage Server without removing each component CRU. If you do not have
sufficient assistance or equipment, use the procedure in “Moving or relocating the
FAStT700 Storage Server” on page 33 to safely move the equipment to its new
location.
If you are moving the FAStT700 Storage Server a significant distance, be sure to
pack it in its original shipping container.
Figure 31. Checking the battery service date
32
IBM
®
TotalStorage
™
FAStT700 Fibre Channel Storage Server: User’s Guide