IBM totalstorage 200, Руководство по установке оборудования

Страница: 19 / 152

Chapter 2. Installation procedures
This chapter provides information about how to install the Models 200 and 225.
Preinstallation checklist
Before beginning installation, record your product information in Table 3. Refer to
this information when service is necessary.
Table 3. Product Information
Record your product information in this table.
Product name _____________________________________________
Machine type _____________________________________________
Model number _____________________________________________
Serial number _____________________________________________
In addition to this IBM TotalStorage Network Attached Storage 200 Installation
Guide , make sure that you have the following items:
v
Model 200 or Model 225
v
Power cords (3)
v
Recovery CD
v
Rack-mounting kit (for Model 225)
v
Safety Information , IBM Part Number 44L2247
If you ordered options for the appliance, this package might contain additional
hardware, , or publications for those options.
If an item is missing or damaged, contact your place of purchase.
Setting up the appliance
This section provides information about the initial installation and setup for the
Models 200 and 225.
Setting up the Model 200
The initial installation of the Model 200 consists of the following steps:
1. Installing optional features (see “Installing optional features” on page 11).
2. Connecting the power cords and communication cables (see “Cabling” on
page 20).
3. Starting the appliance and verifying that the power-on diagnostics completed
successfully (see “Starting the appliance” on page 23).
4. Performing the initial configuration (see “Performing initial configuration” on
page 25).
© Copyright IBM Corp. 2001
5