IBM ThinkVision L170, Руководство по обслуживанию

Страница: 38 / 54

IBM L170 Service Manual
38
17 Switch the chroma-7120 to RGB-mode (with press “MODE” button )
18 switch the MEM.channel to Channel 03 ( with up or down arrow on chroma 7120 )
19 The lcd-indicator on chroma 7120 will show x = 296
±10
, y = 311
±10
, Y = 190
±5
cd/m
2
20 Adjust the RED on OSD window until chroma 7120 indicator reached the value R=100
21 adjust the GREEN on OSD, until chroma 7120 indicator reached G=100
22 adjust the BLUE on OSD, until chroma 7120 indicator reached B=100
23 repeat above procedure ( item 5,6,7) until chroma 7120 RGB value meet the tolence =100
±2
24 Press Exit on OSD window to save the adjustment result
Turn the POWER-button off to on to quit from factory mode.
10. EDIT Content
D-SUB Connector(Analog)
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00 00 FF FF FF FF FF FF 00 24 4D 70 A1 40 E2 01 00
16: 0B 0D 01 03 68 22 1B 78 2A 24 1F A1 5A 49 99 25
32: 1A 4C 55 BF EF 00 81 80 61 4C 71 4F 01 01 01 01
48: 01 01 01 01 01 01 BC 34 00 98 51 00 2A 40 10 90
64: 13 00 54 0E 11 00 00 1E 00 00 00 FD 00 37 4B 1E
80: 53 0E 00 0A 20 20 20 20 20 20 00 00 00 FF 00 35
96: 35 30 30 30 30 31 0A 20 20 20 20 20 00 00 00 FC
112 00 49 42 4D 20 4C 31 37 30 20 54 46 54 0A 00 95
Note: Byte 0C, 0D, 0E, 0F means Serial No. Byte 10, 11 means Manufacture Time. Byte 7F means checksum