IBM ThinkPad X21 2660, Руководство по техническому обслуживанию аппаратной части

Страница: 46 / 87

Beep symptoms
No beep symptoms
Symptom or error FRU or action, in
sequence
One beep and a blank,
unreadable, or flashing LCD 1. Reseat the LCD con-
nector.
2. LCD assembly.
3. System board.
One long and two short
beeps, and a blank or
unreadable LCD 1. System board.
2. LCD assembly.
Two short beeps with error
codes POST error. See “Numeric
error codes” on page 38
Two short beeps with blank
screen 1. System board.
Only cursor appears 1. Reinstall operating
system.
Symptom or error FRU or action, in
sequence
No beep, power-on indicator
on, LCD blank, and no
POST 1. Make sure that every
connector is con-
nected tightly and
correctly.
2. DIMM.
3. System board.
No beep, power-on indicator
on, and LCD blank during
POST 1. Reseat DIMM.
2. System board.
No beep during POST, but
system runs correctly 1. Speaker.
The power-on password
prompt A power-on password or a
supervisor password is set.
Type the password and
press
Enter .
The hard disk password
prompt A hard disk password is set.
Type the password and
press
Enter .
The DOS-full screen looks
smaller. Start the ThinkPad Config-
uration program and set the
Screen expansion function.
LCD-related symptoms
Important
The TFT LCD for the notebook computer contains many
thin-film transistors (TFTs). A small number of dots that are
missing, discolored, or always lighted is characteristic of
TFT LCD technology, but excessive pixel problems can
cause viewing concerns. The LCD should be replaced if
ThinkPad X21
41