IBM ThinkPad T23 2647, Дополнительное руководство

Страница: 27 / 86

is attached when the computer resumes, the computer display remains blank
and output is not displayed. This restriction does not depend on the
resolution value. Press Fn+F7 to bring up the computer display.
Problem: The computer does not return from standby mode, or the standby
indicator stays on and the computer does not work.
Solution: The computer automatically enters standby or hibernation mode
when the battery is depleted. Connect the ac adapter to the computer; then
press Fn.
Problem:
When you are using the port replicator, resuming normal operation
from hibernation or standby mode takes a long time.
Solution: If the Ethernet port is enabled, but the port replicator is not
connected to a network, resuming operation can take a long time. The
computer queries the Ethernet until the timeout timer stops the query. If you
want to access an Ethernet, connect the network cable. If you are not using
the network, disable the Ethernet port as follows:
For Windows 98:
1. Double-click the System icon in the Control Panel .
2.
Click the
Device Manager
tab.
3. Double-click Network Adapter .
4. Double-click Intel Pro/100 VE Network connection .
5. Mark the Disable in this hardware profile check box.
6.
Click
OK
.
7. Close all windows.
8. Restart the computer.
For Windows NT:
1. Double-click the System icon in the Control Panel .
2. Select Intel Pro/100 VE Network connection , and click Startup...
3. Select Disabled .
4. Click OK .
5. Click Close .
6.
Close all windows.
7.
Restart the computer.
For Windows 2000:
1. Double-click the System icon in the Control Panel .
2.
Click the Hardware tab.
3.
Click the
Device Manager
button.
Solving computer problems
Chapter 2. Solving computer problems
19