IBM ThinkPad R40, Руководство по техническому обслуживанию аппаратной части

Страница: 53 / 178

Indicator Meaning
«3¬
Drive in
use Green: Data is being read from or written to
the hard-disk drive, the diskette drive,
or the drive in the Ultrabay Plus
device. When this indicator is on, do
not put the computer into standby
mode or turn off the computer.
Note: Do not move the system while the green
drive-in-use light is on. Sudden physical shock
could cause drive errors.
«4¬
Num lock Green: The numeric keypad on the keyboard
is enabled. To enable or disable the
keypad, press and hold the Shift key,
and press the NumLk (ScrLk) key.
«5¬
Caps lock Green: Caps Lock mode is enabled. To
enable or disable Caps Lock mode,
press the Caps Lock key.
«6¬
Power on Green: The computer is on and ready to use.
This indicator stays lit whenever the
computer is on and is not in standby
mode.
«7¬
Battery
status Green: The battery is in use and has enough
power. The ac adapter has charged
the battery completely.
Blinking green:
The battery is being charged, but still
has enough power to operate. (At
regular intervals, the indicator light
turns off briefly.)
Orange: The battery is being charged, but the
battery power is still low.
Blinking orange:
The battery needs to be charged.
When the indicator starts blinking
orange, the computer beeps three
times.
«8¬
Standby
status Green: The computer is in standby mode.
Blinking green:
The computer is entering standby
mode or hibernation mode, or is
resuming normal operation.
«9¬
Ultrabay
status Green: An Ultrabay Plus device is installed
and in use.
Blinking green:
An Ultrabay Plus device is in the
process of being detached.
Turn off: An Ultrabay Plus device is ready to
be attached or detached.
Note: If you are using Windows 2000, the
Ultrabay status indicator does not blink while an
Ultrabay Plus device is being detached. Instead,
a message box pops up when the process is
completed; then the indicator turns off.
Product overview
ThinkPad R40
49