IBM THINKPAD I 1200 -, Руководство по техническому обслуживанию аппаратной части, Страница: 45 / 233

If the error recurs, replace the FRU that caused the
error.
Note: With some FRUs, especially the system board,
the problem may be caused by peripheral
FRUs. Verify that each peripheral FRU, such as
the flexible cable, has no problem by doing the
following:
a. Replace each peripheral FRU one at a time,
and run the test again.
b. If the peripheral FRUs have no problem,
replace the main FRU itself.
To see the FRU structure of each model,
refer to “Product overview” on page 95.
6. To exit the test, select Quit – Exit Diag .
To cancel the test, press Esc .
The following table lists the options on the test menu.
Diagnostics Interactive Tests
v
Run Normal Test
v
Run Quick Test
v
CPU/Coprocessor
v
Systemboard
v
Video Adapter
v
Serial Port
v
Parallel Port
v
Fixed Disks
v
Diskette Drives
v
Other Devices
v
Memory Test – Full
v
Memory Test – Quick
v
Keyboard
v
Video
v
Internal Speaker
v
Mouse
v
Joystick Test
v
Diskette Test
v
System Load
v
CD-ROM/DVD
v
Stereo Speaker
Note: In Keyboard test within Interactive Tests , the Fn key is
scanned only once. Each key should be pressed for at least 2
seconds; otherwise, it cannot be sensed.
Note: The testing of 802.11b requires an Access Point
properly prepared prior to conducting the test. When
testing 802.11b with PC-Doctor DOS, please
confirm the following points:
1. An OBI’s Access Point is located about 3 meters
from the system.
2. The encryption is disabled on the Access Point.
If the distance between the Access Point and the
system is too far, the test may report failure even if
the device is properly working. If the encryption is
enabled on the Access Point, the test program
ThinkPad i Series 1200/1300
35