22
In the name box, type the following:
src_cd:\DRIVERS\W98UP\W98GOLD\Q233ð17\233ð17UP.EXE
where
src_cd
is the CD-ROM drive letter of your computer.
23
Click OK.
Follow the instructions on the screen.
24
Click OK to reboot the computer.
Updating the DBLBUFF.SYS:
You do this procedure only when a message appears while
you are running the SETUP.EXE to install Windows 98.
1
Click Start.
2
Click Run....
3
Type the following:
src_cd:\DRIVERS\W98UP\W98GOLD\Q2ð9321\2ð9321UP.EXE
where
src_cd
is the drive letter of the CD-ROM drive letter of your computer.
4
Click OK.
5
Follow the instructions on the screen.
6
The following message appears: “Please type the location where you want to place the
extracted files.” Type the address of the temporary directory (c:\win98), and click OK.
7
Return to step 6 on page 13 to continue the installation of the Windows 98.
Installing Windows 95
Some new files must be incorporated at the time of installation.
Note:
To install Windows 95 from a CD-ROM drive, create a Startup Disk for Windows 95 so that
you can enable use the CD-ROM drive. Then boot the system with the diskette.
To create the Startup Disk for Windows 95, do as follows:
1. Insert a blank diskette into the diskette drive.
2. Open the Control Panel window.
3. Double-click Add/Remove Program.
4. Click the Startup Disk tab.
15
