Setting Up Your Computer
You are now ready to assemble and start your computer.
1
Connect the external diskette drive.
a) Open the cover on the external diskette drive
connector.
b) Attach the cable to the external diskette drive, and
then to the external diskette drive connector on the
side of the computer. Press the sides of the
connector
1
as you connect it to the devices
2
.
External diskette drive
External diskette drive connector
1
1
2
1
1
2
2
If you want to connect a printer to your computer, open the
connector cover. Connect one end of the printer cable to
the parallel connector and the other end to your printer.
Then power on the printer.
3
Connect the AC Adapter to the computer's power jack (at
the rear of the computer) in the order shown.
3
3
2
1
4
Open the liquid crystal display (LCD).
Press the LCD button
1
and open the LCD
2
. Then
position the LCD so that it is convenient for viewing.
1
2
5
Power on the computer.
a) Push and release the power switch
1
. The power
switch automatically snaps back to its original position.
b) Adjust the brightness of the display with the brightness
control
2
.
1
2
Copyright IBM Corporation 1998
3
Title: C79FOMST CreationDate: 06/21/98 14:58:06
