IBM ThinkPad 560X, Руководство пользователя

Страница: 141 / 189

Troubleshooting Charts
Problem Action
The MIDI connector of a
port replicator does not
work. To enable the MIDI connector of a port replicator, use the ThinkPad
Configuration program. Make sure that the MIDI connector is enabled by doing
the following procedure:
1. Start the ThinkPad Configuration program.
2. Click on MIDI/Joystick Port.
3. Confirm that the MIDI Port is enabled. If not, click on Enable; then click on
OK.
4. Close the ThinkPad Configuration program and restart the computer.
Note: When you restart the computer, the installation of a MIDI device driver
might be required. Follow the instructions on the screen and install the
device driver for your computer's operating system.
Other Option Problems
Problem Action
An IBM option that you
just installed does not
work. Make sure that:
The option is designed for your computer.
The option was installed according to the instructions supplied with the
option.
Other installed options or cables are not loose.
There is no I/O address or interrupt level (IRQ) DMA channel conflict. To
see the system resource status, start the ThinkPad Configuration program
and click on the respective device buttons.
If the test program for the option did not find the problem, have the computer
and option serviced.
An IBM option that used
to work no longer works. Make sure that:
The option is securely connected to your computer.
The option passes its own test. If the option came with its own test
instructions, use those instructions to test the option.
There is no system resource conflict (see “Advanced” in the
Online User's
Guide ).
If these items are correct and the test program did not find the problem, have
the computer and option serviced.
Chapter 4. Solving Computer Problems
127
Title: C79FPMST CreationDate: 06/22/98 12:26:52