IBM ThinkPad 2644, Руководство по техническому обслуживанию аппаратной части

Страница: 38 / 113

RELATED SERVICE INFORMATION
Ÿ
The Fn
+
F4 keys are pressed.
Ÿ
The LCD cover is closed. If you select the Will not
suspend even if LCD is closed check box in the
Power Management Properties window, the computer
will not enter suspend mode even if the LCD is
closed; the LCD only turns off.
Ÿ
The Suspend button is selected in the Fuel-Gauge
program.
Ÿ
The specified time has elapsed from the last
operation with the keyboard, the TrackPoint, the hard
disk drive, the parallel connector, or the diskette drive;
or the AC Adapter is plugged in.
In Windows 95, the timer is set by the Suspend
Timer selection in the Power Properties window. In
Windows 98, the timer is set by the System standby
timer selection in the “Power Management
Properties” window.
Ÿ
The battery indicator blinks orange, indicating that the
battery power is low. If you select Hibernate when
battery becomes low check box in the “Power
Management Properties” window, the computer enters
hibernation mode under this condition.
Note
Even if you don't set the low-battery alarm, the
charge indicator lets you know that the battery is
low, and then the ThinkPad automatically enters
the power-saving mode. This default low-battery
behavior is independent of the operating system,
so the computer might behave differently from
your setting if you set the low-battery alarm. The
computer chooses appropriately between your
setting and the default setting.
Any one of the following events causes the computer to
resume operation from suspend mode:
Ÿ
The Fn key is pressed.
Ÿ
The LCD cover is opened.
Ÿ
The ring indicator (RI) is signaled by a serial device
or PC Card device.
Ÿ
The power switch is turned on.
Ÿ
The resume timer is set. In Windows 95, you can set
the time with the Resume on timer selection in the
“Power Management Properties” window. In
Windows 98, the Scheduled Tasks setting has
priority over the Resume on timer selection in the
“Power Management Properties” window.
Introduction
29