IBM Terminal Emulation TN5250, Руководство пользователя

Страница: 45 / 51

A-4 Appendix A
Status errors and their descriptions are listed in Table A-4. Refer to the IBM
5394 Remote Control Unit Functions Reference Manual for further
information.
Table A-4 Status Line Errors
Error Description
0000 Help key not allowed
Either no system reference code appears, or the
application does not support the key you pressed.
0001 Last keystroke not recognized
The terminal cannot keep up with the rate of
information entered. As a result, the last character
entered is not recognized.
0002 Last keystroke not recognized
The terminal received an invalid key code from the
keyboard. Either the code is incorrect for the
keyboard at the terminal, or an error occurred in
translating the keystroke.
0003 Invalid CMDx or Fx key
You pressed an invalid
F
or
Alt
key sequence.
0005 Cursor in protected area of display
The cursor is not in an input field, but in a
protected area of the display.
0006 Invalid key followed SYS REQ key
You pressed an invalid key after pressing the
Alt Prtsc
key sequence, and before pressing the
Ctrl
(right) or
Ctrl
(left) keys.
0007 Mandatory enter field, must enter data
There is at least one mandatory entry field on the
screen that you must enter data into before the
screen can be changed or processed.
0008 This field requires alphabetic characters
You tried to enter nonalphabetic characters into a
field designated alphabetic. Valid characters here
are:
◆
A
through
Z.
◆ Blank ( ), comma (,), period (.), hyphen (-), and
apostrophe (’).
◆
(pad)
1
key.
The (pad)
1
key is used to duplicate these
characters in the field.