IBM System x3610, Руководство по диагностике и обслуживанию

Страница: 48 / 144

Modified /boot/grub/menu.lst contents Notes
title floppy
root
chain1
title failsafe
kernel (hd0,1)/boot/vmlinuz.shipped root=/dev/hda2 ide=nodma apm=off vga=normal nosmp 1
disableapic maxcpus=0 3
initrd (hd0,1)/boot/initrd.shipped
Note 1: The kernel line is shown with a line break. In your file, the entire entry must all be on one line.
You must restart the Linux operating system after you complete these procedures
for the changes to take effect and to enable SOL.
Microsoft Windows 2003 Standard Edition configuration:
Note: This procedure is based on a default installation of the Microsoft
®
Windows
2003 operating system.
To configure the Windows 2003 operating system for SOL operation, complete the
following steps. You must be logged in as a user with administrator access to
perform this procedure.
1. Determine which boot entry ID to modify:
a. Type bootcfg at a Windows command prompt; then, press Enter to display
the current boot options for your server.
b. In the
Boot Entries
section, locate the boot entry ID for the section with an
OS friendly name of Windows Server 2003, Standard. Write down the boot
entry ID for use in the next step.
2. To enable the Microsoft Windows Emergency Management System (EMS), at a
Windows command prompt, type
bootcfg /EMS ON /PORT COM1 /BAUD 19200 /ID boot_id
where boot_id is the boot entry ID from step 1b; then, press Enter.
3. Verify that the EMS console is redirected to the COM1 serial port:
a. Type
bootcfg
at a Windows command prompt; then, press Enter to display
the current boot options for your server.
b. Verify the following changes to the bootcfg settings:
v
In the
Boot Loader Settings
section, make sure that
redirect
is set to
COM1
and that
redirectbaudrate
is set to
19200
.
v
In the
Boot Entries
section, make sure that the
OS Load Options:
line
has
/redirect
appended to the end of it.
The following examples show the original bootcfg program output and the output
after modification.
30
IBM System x3610 Type 7942: Problem Determination and Service Guide