IBM System x3200 4362, Руководство пользователя

Страница: 35 / 84

Removing the side cover
To remove the server side cover, complete the following steps:
1. Review the safety information that begins on page v and “Installation guidelines”
on page 18.
2. Turn off the server and all attached devices (see “Server power features” on
page 11); then, disconnect all power cords and external cables.
3. Lay the server on its side.
4. Unlock the side cover; then, press the cover-release latch down, as indicated by
the two arrows on the latch.
Cover-release
latch
Key lock
5. Lift the side cover off the server and set it aside.
To replace the side cover, see “Reinstalling the side cover” on page 44.
Attention: For proper cooling and airflow, replace the cover before you turn on
the server. Operating the server for extended periods of time (more than 30
minutes) with the cover removed might damage server components.
Chapter 2. Installing optional devices
21