Installing the power cord
To install the power cord, complete the following steps.
Mounting
plate
Mounting
post
Plug
mount
M3
screws
Power
cord
Power
cord mounting
bracket
1. Grasp the end of the power cord with the plug mount molded onto it in your
right hand. Notice the shape of the plug and how it matches the cutout in the
mounting plate.
2. Align the mounting posts on the mounting plate with the slots in the plug mount
and install the power cord onto the mounting plate.
3. Position the entire assembly inside the left rail and align the mounting posts with
the holes in the back of the mounting bracket on the rail.
4. Install the power cord and mounting plate.
5. Plug the power cord that you are working on into a PDU.
6. Install the chassis in the iDataPlex rack (see “Installing the 2U chassis in a Type
7825 iDataPlex rack” on page 124) or (“Installing a 3U chassis in a Type 7825
iDataPlex rack” on page 130).
Chapter 4. Removing and replacing server components
93
Содержание System x iDataPlex dx340
