•
Any code load operation (library or drive) initiated from a library user interface and
not associated with a FRU replacement
•
Any prepare or finish service procedure initiated from a library user interface
including set storage slot offline or online
•
Any drive serial number change not associated with a FRU replacement
•
Any drive power cycle initiated from a library user interface
•
Any node card reset initiated from a library user interface
Notes:
•
Each login and logout is only logged if security is enabled.
•
Door open is logged whether or not SNMP Audit Logging is enabled.
The following information is provided in the logs for each of the events listed above:
•
Machine type, model, and serial number of the reporting machine
•
The UserID initiating the event
•
Level of severity
•
Trap ID
•
Description of the event
Note:
The UserID is only applicable for the Web when security is enabled and for operations
performed from the operator panel.
Parent topic:
SMI-S support
This section describes the Storage Management Initiative - Specification (SMI-S) service
provided by the TS3500 Tape Library.
SMI-S defines a standard interface for interoperable, extensible, and secure management of
heterogeneous and distributed storage systems. This interface uses an object-oriented,
XML-based, messaging-based protocol designed to support the specific requirements of
managing devices such as the TS3500 Tape Library in a storage environment. The SMI-S
specification describes the information available to a WBEM client, such as the IBM® Tivoli®
Storage Productivity Center (TPC), from an SMI-S-compliant CIM WBEM Server such as the
