IBM System Storage TS2900, Руководство по установке, эксплуатации и обслуживанию

Страница: 72 / 257

3-28
TS2900 Tape Autoloader Setup, Operator, and Service Guide
• User — User access permission allows users to monitor the library, but not to
perform functions that affect the library.
• Superuser — Superuser access permission allows users to operate the physical
and logical library, but not to change configuration settings.
• Administrator — Administrator access permission allows users to perform
tape library functions and change configuration settings.
5. Click Submit to enable the settings.
Saving the Library Configuration
Figure 3-31. Save configuration
Note: This is a recommended procedure.
Each time you change the configuration of your library, you should save the
configuration. This function also allows you to maintain several library configuration
profiles that can be restored to the library when desired using the Web User Interface.
To save library configuration, complete the following procedure.
1. Expand Configure Library , if necessary, and click on Save/Restore in the left
navigation pane of the Web User Interface.
2. Click Save to create a configuration file of your library on your computer.
Configuring Your Library using the Operator Panel
To configure your library using the Operator Panel, complete the following
procedures.
1. “Logging in to the Operator Panel” on page 3-28
2. “Configuring Network Settings” on page 3-29
3. “Configuring Library Settings” on page 3-30
Logging in to the Operator Panel
In many environments, the default network settings may be sufficient to access your
tape library on a network. To change the default network settings using the Operator
Panel, complete the following procedure:
1. When the library is initialized, press the Enter key to move to the Password
screen.
2. Enter 0000 , the default password. The top menu screen appears.
3. When finished using the Operator Panel, press Cancel to return to the top menu
screen.
4. When finished, press the Minus key to select Logout , and press Enter.
a29z0129